You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This is an awning operator of aluminum diecast construction with an aluminum painted finish used on Stanley windows. It is left-handed with a matching crank handle with an offset link arm. It has a reversed L-shaped mounting hole pattern with one hole... ... more | go to store |
This is a left-hand operator. Determined by viewing from inside of window looking out. Can be used on either awning or louver-type windows. Side mount design. | Prime-Line Diecast Left Hand RV Window Slant Sill Operator in Black | 5.4 H x 3.75 W x 1.8... ... more | go to store |
This is a jalousie operator that has an aluminum finish and diecast construction. Mounting holes are 4-3/4 in. or 3-7/8 in. on center. It has a reversible, non-handed design that can be used on either left or right-handed installations. The 3 link arms... ... more | go to store |
This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator. | Prime-Line Diecast Bronze, Universal Jalousie Operator w/ 4-1/4 in. Link, Daryl (Single... ... more | go to store |
This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. | Prime-Line Diecast... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
Designed to install on the exterior side of 48 in. wide sliding screen doors to provide child safety, and to protect the screen fabric from pet damage. This screen door grille measures 26 in. tall, and with the fasteners and installation instructions... ... more | FREE shipping go to store |
These door viewer covers are constructed of solid brass and come in optional finishes. They feature a 9/16 inch inside diameter and fit over door viewers constructed with 9/16 inch outside diameter cylinders. Privacy covers like these can be used with... ... more | go to store |
These door viewer covers are constructed of solid brass and come in optional finishes. They feature a 9/16 inch inside diameter and fit over door viewers constructed with 9/16 inch outside diameter cylinders. Privacy covers like these can be used with... ... more | go to store |
These door viewer covers are constructed of solid brass and come in optional finishes. They feature a 9/16 inch inside diameter and fit over door viewers constructed with 9/16 inch outside diameter cylinders. Privacy covers like these can be used with... ... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
This is a project-in (or push-in) locking handle used on steel windows. It is right-handed with a 7/16 in. hook projection. The mounting holes are 1-3/8 in. on center and it is a heavy white bronze casting. | Prime-Line Project-In Locking Handle, Left... ... more | FREE shipping go to store |
This is a matching combination cover in plastic and matching diecast crank. Both in a bronze finish. Both cover and crank are used on the Entrygard (window casement) dual arm operators Prime-line parts TH 23076 through TH 23079. | Prime-Line 11/32 in.... ... more | go to store |
This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
This is a left-handed bronze diecast casement window latch used by a variety of vinyl or wood window manufacturers. It is installed on the opening edge of the casement window. The lever operates a steel latch within the housing that engages the keeper... ... more | go to store |
This is a drop-down door holder with a rubber tip. Features a 3-hole mounting, with a spring-loaded design that retracts in the up position when not in use. Finish: Bronze | Prime-Line Diecast, Bronze Finish, Drop Down Door Holder (Single Pack) Metal... ... more | go to store |
This is a drop-down door holder with a rubber tip. Features a 3-hole mounting, with a spring-loaded design that retracts in the up position when not in use. Finish: Bronze | Prime-Line Diecast, Bronze Finish, Drop Down Door Holder (Single Pack) Metal... ... more | go to store |
This non-handed diecast black flush mount patio door handle with wood pull is a design that fits Croft series 301 patio doors, and a variety of other manufacturers of 7/8 in. to 1-1/8 in. thick patio doors. It comes with a shim to accommodate the... ... more | go to store |
This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator. | Prime-Line Single Arm... ... more | FREE shipping go to store |
This sliding patio door handle set is constructed of black painted diecast materials and has a wooden handle finished in a light stain. The handle set is non-handed allowing it to be used on both left and right-handed patio sliding doors using mounting... ... more | go to store |
This patio door handle is used on C and P doors. The inside handle is a gray diecast body with wood handle attached and the outside handle is also gray diecast. It has 3-1/2 in. mounting holes, is surface mounted and does not require any mortising.... ... more | FREE shipping go to store |
This sliding patio door handle set is constructed of mixed materials including wood and diecast components, and it is designed to fit 1 in. thick internally latching type doors using a 3-15/16 in. hole center spacing. The outside non-keyed locking pull... ... more | go to store |
This is a deadbolt used on commercial aluminum or steel doors. It is a single point lock with a pivoting laminated steel bolt. The bolt is activated by a pivoting mechanism by the key cylinder or thumb turn. It comes with a faceplate and fasteners. The... ... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... ... more | go to store |
These door holders are constructed of zinc diecast. Each of these door holders feature a 4-inch, drop-down reach and have replaceable black rubber tips. These kick stand type, drop down door holders are designed for use with all swinging doors in both... ... more | go to store |
These door holders are constructed of a heavy duty diecast material. Each of these door holders feature a 4-inch, drop-down reach and have replaceable black rubber tips. These kick stand type, drop down door holders are designed for use with all... ... more | go to store |
These door holders are constructed of zinc diecast. Each of these door holders feature a 4-inch, drop-down reach and have replaceable black rubber tips. These kick stand type, drop down door holders are designed for use with all swinging doors in both... ... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
These door holders are constructed of a heavy duty diecast material. Each of these door holders feature a 4-inch, drop-down reach and have replaceable black rubber tips. These kick stand type, drop down door holders are designed for use with all... ... more | go to store |
This door viewer is constructed of high-impact plastic and comes gray in color. It features a large viewing screen of almost 2 in. in diameter and a reversed prism mirrored clear image. The giant screen door viewer can be installed on doors ranging... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. Size: 13.25" H x 3.88" W... ... more | go to store |
This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. Size: 13.25" H x 3.88" W... ... more | go to store |
This operator cover is constructed from diecast Zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator. | Prime-Line 3-15/16 in.... ... more | go to store |
This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
Ads related to Prime-Line Entrygard Operator Diecast Cover, Snap-On Design Single Pack in Brown | 7.8 H x 4.8 W x 1.75 D in | Wayfair TH 22232