Home Hardware › new 2 in 1 round

ZORO SELECT U17567.031.0100 Round U-Bolt, 5/16"-18, 2 3/16 in Inside Ht, 1 1/2

Standard U-Bolt, Standard U-Bolt, 304 Stainless Steel, Finish Plain, Thread Size 5/16 In.-18, Thread Length 1 in, Inside Length 2 3/16 in, Inside Width 1 1/2 in, Pipe Size (In.) 1 in, Characteristics Has Coarse Rolled Threads, for Steel or Wrought Iron... more

3 1/2"W x 3 1/2"H x 1/2"P Reese Round Rosette, Alder

Our rosettes are the perfect accent pieces to cabinetry, furniture, fireplace mantels, ceilings, and more. Each pattern is carefully crafted after traditional and historical designs. more

Deltana Solid Brass 2-1/2" Round Flush Mount Pull for Sliding Doors

Features: (1) Flush Mount Pull Solid Brass construction for increased durability Interior Diameter: 2-1/8" Exterior Diameter: 2-1/2" Trim rises 1/8" from surface Height: 3/8" Recommended for use on sliding cabinet and/or pocket doors Available in an… more

Brown Cast Iron Fleur De Lis Round Drawer Pulls/ Knobs (Set Of 12) - 2 X 2 X 1.25 inches

Overall Size - Each Knob Measures A Substantial 2 Inches In Diameter With A Projection Of 1.25 Inches, Ensuring A Noticeable And Tactile Presence On Your Furniture.. more

ZORO SELECT U17244.031.0201 Round U-Bolt, 5/16"-18, 5 5/8 in Inside Ht, 2 1/2

Standard U-Bolt, Standard U-Bolt, Steel, Finish Hot Dipped Galvanized, Thread Size 5/16 In.-18, Thread Length 3 in, Inside Length 5 5/8 in, Inside Width 2 1/2 in, Pipe Size (In.) 2 in, Characteristics ASME B18.2.2- ASTM A563 Grade A, Includes (2) Nuts,... more

ZORO SELECT U17244.037.0300 Round U-Bolt, 3/8"-16, 4 1/8 in Inside Ht, 3 1/2 in

Standard U-Bolt, Standard U-Bolt, Steel, Finish Hot Dipped Galvanized, Thread Size 3/8 In.-16, Thread Length 1 1/4 in, Inside Length 4 1/8 in, Inside Width 3 1/2 in, Pipe Size (In.) 3 in, Characteristics ASME B18.2.2- ASTM A563 Grade A, Includes (2)... more

ZORO SELECT U24212.050.0400 1/2"-13 x 4 in Combination Phillips/Slotted Round

Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Combination Slotted/Phillips, Thread Size 1/2 In.-13, Fastener Length 4 in, Head Width 0.815 in, Head Height 0.255 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional... more

DEWALT 05528-PWR Spike Nail Drive Anchor, 1/4" Dia., 2-1/2" L, Steel Zinc

Pre-Expanded Anchor, Anchor Diameter 1/4 in, Overall Length 2 1/2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.109375 in, Head Diameter 0.5 in, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/4 in, Drive Pin... more

DEWALT 02870-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1-1/2" L, Alloy

Hammer Drive Pin Anchor, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Stainless Steel, Finish Plain, Head Type Round, Head Diameter 0.54 in, Head... more

ZORO SELECT U70650.025.0150 Nail Drive Anchor, 1/4" Dia., 1-1/2" L, Alloy Steel

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U12005.100.0001 1"-8 Grade 5 Plain Finish Steel Round Slotted

Castle Nut, Finish Black Oxide, Material Steel, Material Grade/Class Grade 5, Thread Size 1 In.-8, Hex Width 1 1/2 in, Hex Height 55/64 in, Hex Type Standard Hex, Lock Type Slotted Castle, Dimensional Standards ASME B18.2.2, System of Measurement Inch,... more

ZORO SELECT U17273.087.1200 Round U-Bolt, 7/8"-9, 16 1/16 in Inside Ht, 12 7/8

Standard U-Bolt, Standard U-Bolt, Steel, Finish Zinc Plated, Thread Size 7/8 In.-9, Thread Length 4 1/4 in, Inside Length 16 1/16 in, Inside Width 12 7/8 in, Pipe Size (In.) 12 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (4) Nuts more

ZORO SELECT U38883.012.0350 O-Ring,Silicone,3-1/2,3.762,PK25

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 3 1/2 in, Nominal Width 1/8 in, Actual Inside Dia. 3.484 in,... more

WINGITS RC-MAWSD35-6 MASTER Anchor Super Duty Screw Anchor, 3-1/2" L, Nylon, 6

Wall Anchor, System of Measurement Inch, Wall Anchor Type Winged Anchor, Anchor Length 3 1/2 in, Anchor Diameter 3/16 in, Thread Size #10-32, Thread Length 3 3/8 in, Drive Type Phillips, Flange Style Flush, Head Type Round, Includes Screw Yes, Screw... more

ZORO SELECT 371285G 7/8"-14 Grade 5 Plain Finish Steel Round Slotted Castle

Castle Nut, Finish Black Oxide, Material Steel, Material Grade/Class Grade 5, Thread Size 7/8 In.-14, Hex Width 1 5/16 in, Hex Height 43/64 in, Hex Type Standard Hex, Lock Type Slotted Castle, Dimensional Standards ASME B18.2.2, Material Quality... more

RULAND SPK-20-F Shaft Collar,Clamp,2Pc,1-1/4 In,Steel

Shaft Collar, System of Measurement Inch, Bore Type Round Keyed, Bore Diameter 1 1/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 2 1/16 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.3 in, Collar Width 1/2 in, Collar... more

DAYTON 1L643 Shaft Collar,Set Screw,1Pc,1-1/4 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 2 in, Inside Height to Flat Not Applicable, Clearance Diameter 2 in, Collar Width 11/16 in, Collar Material... more

DAYTON 1L722 Shaft Collar,Clamp,2Pc,1-1/8 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 7/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.05 in, Collar Width 1/2 in, Collar Material... more

TB WOODS 6J114 Sure-Flex Sleeve Coupling Flange, 6J, Bore 1-1/4"

Sleeve Coupling Flange, Coupling Size 6, Maximum Speed 6,000 RPM, Maximum Torque 585 in-lb, Outside Diameter 4 in, Bore Type Round Keyed, Hub Diameter 2 1/2 in, Hub Material Cast Iron, For Bushing Size Not Applicable, Bore Diameter 1 1/4 in, Length... more

WALLCLAW ANCHORS PCK-WC100-YS WallClaw Anchors 60 lb Tension Strength 1-1/4" L,

Wall Anchor, System of Measurement Inch, Wall Anchor Type Hammer-In Plug Anchor, Anchor Length 2 in, Thread Size #8 to #18, Drive Type Phillips, Flange Style Flanged, Head Type Round, Includes Screw Yes, Screw Size Included #8, Screw Length Included 1... more

DEWALT 05546-PWR Spike Nail Drive Anchor, 3/8" Dia., 2" L, Steel Zinc Plated,

Pre-Expanded Anchor, Anchor Diameter 3/8 in, Overall Length 2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.21875 in, Head Diameter 0.75 in, Drill Bit Size 3/8 in, Minimum Installation Depth 1 3/4 in, Drive Pin Anchor... more

RULAND SP-16-SS Shaft Collar,Clamp,2Pc,1 In,303 SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 3/4 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.03 in, Collar Width 1/2 in, Collar Material... more

RULAND SPK-16-F Shaft Collar,Clamp,2Pc,1 In,Steel

Shaft Collar, System of Measurement Inch, Bore Type Round Keyed, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 3/4 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.03 in, Collar Width 1/2 in, Collar... more

CLIMAX METAL PRODUCTS H2C-237 ShaftCollar,Std,Clamp,3-1/2inOutsidedia.

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 2 3/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 3 1/2 in, Inside Height to Flat Not Applicable, Clearance Diameter 3.5 in, Collar Width 5/8 in, Collar Material... more

TB WOODS 6J138 Sure-Flex Sleeve Coupling Flange, 6J, Bore 1-3/8"

Sleeve Coupling Flange, Coupling Size 6, Maximum Speed 6,000 RPM, Maximum Torque 585 in-lb, Outside Diameter 4 in, Bore Type Round Keyed, Hub Diameter 2 1/2 in, Hub Material Cast Iron, For Bushing Size Not Applicable, Bore Diameter 1 3/8 in, Length... more

DAYTON 1L721 Shaft Collar,Clamp,2Pc,1 In,SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 3/4 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.83 in, Collar Width 1/2 in, Collar Material... more

CLIMAX METAL PRODUCTS RC-100-A Coupling, Aluminum

Rigid Shaft Coupling, Bore Diameter 1 1 in, Bore Diameter 2 1 in, Bore Type Round, Clearance Diameter 2 in, Coupling Construction One-Piece, Coupling Material Aluminum, Coupling Outside Diameter 2 in, Different Bore Sizes No, Keyway Depth 1 Not... more

DAYTON 6L019 Coupling,Rigid Steel

Rigid Shaft Coupling, Bore Diameter 1 1 in, Bore Diameter 2 1 in, Bore Type Round Keyed, Clearance Diameter 2 in, Coupling Construction One-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 2 in, Different Bore Sizes No, Keyway Depth 1... more

DAYTON 3ZN47 Coupling,Rigid Steel

Rigid Shaft Coupling, Bore Diameter 1 7/8 in, Bore Diameter 2 7/8 in, Bore Type Round, Clearance Diameter 1.42 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 1 5/8 in, Different Bore Sizes No, Keyway... more

ZORO SELECT ZA0256-AL28 Standoff Cap, 5/16"-18 Thrd Sz, Aluminum Clear

Standoff Cap, Thread Size 5/16 In.-18, Cap Shape Round, Cap Head Diameter 1 1/4 in, Cap Head Width Not Applicable, Cap Head Height 1/2 in, Material Aluminum, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Bushing Diameter 1/2 in, Cap... more

RULAND SP-14-SS Shaft Collar,Clamp,2Pc,7/8 In,303 SS

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 7/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 5/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.92 in, Collar Width 1/2 in, Collar Material... more

ZORO SELECT U38801.018.0250 O-Ring,Dash 333,Buna N,0.21 In.,PK50

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 2 1/2 in, Nominal Width 3/16 in, Actual Inside Dia. 2.475 in,... more

GENERAL TOOLS 79 Automatic Center Punch,0.5 D x 5 L

Automatic Center Punch, Automatic Yes, Punch Type Center Punch, Tip Size 1/16 in, Tip Type Point, Shank Shape Round, Shank Diameter 1/2 in, Grip Style Knurled, Overall Length 5 in, Container Type None, Material Applications Metal, Includes Striking Cap... more

TB WOODS 6J58 Sure-Flex Sleeve Coupling Flange, 6J, Bore 5/8"

Sleeve Coupling Flange, Coupling Size 6, Maximum Speed 6,000 RPM, Maximum Torque 585 in-lb, Outside Diameter 4 in, Bore Type Round Keyed, Hub Diameter 2 1/2 in, Hub Material Cast Iron, For Bushing Size Not Applicable, Bore Diameter 5/8 in, Length... more

ZORO SELECT B17274.050.0400 Round U-Bolt, 1/2"-13, 6 3/4 in Inside Ht, 4 9/16

Standard U-Bolt, Standard U-Bolt, Steel, Finish Hot Dipped Galvanized, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 6 3/4 in, Inside Width 4 9/16 in, Pipe Size (In.) 4 in, Characteristics ASME B18.2.2- ASTM A563 Grade A, Includes (4) Nuts,... more

RULAND CLX-10-8-SS Coupling,One Piece,Bore Dia 5/8 x 1/2 In

Rigid Shaft Coupling, Bore Diameter 1 5/8 in, Bore Diameter 2 1/2 in, Bore Type Round, Clearance Diameter 1.51 in, Coupling Construction One-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 1 5/16 in, Different Bore Sizes Yes, Keyway... more

MAG-MATE BL1000 Lifting Magnet,1000 lb Cap,9-1/2 In OAL

Lifting Magnet, Maximum Flat Load Capacity 1,000 lb, Maximum Round Load Capacity Not Applicable, Minimum Thickness for Activation 3/16 in, Minimum Thickness for Maximum Load Capacity 3/16 in, Activation Mechanism Pry-Off Handle, Magnet Length 6 1/2 in,... more

RULAND SPC-16-12-F Coupling,Two Piece,Bore Dia 1 x 3/4 In

Rigid Shaft Coupling, Bore Diameter 1 1 in, Bore Diameter 2 3/4 in, Bore Type Round Keyed, Clearance Diameter 2.05 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 1 3/4 in, Different Bore Sizes Yes, Keyway... more