Home Hardware › Sliding Doors › Sliding › gliderite 3 5 inch ball

CRL M6145 3/4 Sliding Shower Door Roller and Bracket - pack of 2

CRL 3/4 Sliding Shower Door Roller and Bracket has an oval edge nylon roller steel ball bearing inner-race two-part extruded aluminum bracket that clamps to the top of 3/16 (5 mm) thick frameless glass door panels. Comes two rollers per package. Most... more

Prime-Line Frameless Sliding Shower Door Top Bracket, 3/4 in, Flat Plastic Wheel, Steel Ball Bearings 5.4 H x 3.75 W x 0.8 D | Wayfair M 6054

This shower door roller assembly is constructed of extruded aluminum and comes in a milled aluminum finish. It features a thru-glass binder post and screw for fastening the bracket to the top of the glass on frameless sliding shower door systems. The... more

Prime-Line Sliding Screen Door Spring-Loaded Roller Assembly, High Density 5.4 H x 3.75 W x 0.3 D in gray in Silver | Wayfair B 707

This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... more

Prime-Line Sliding Screen Door High Density Polyethylene Ball Bearing Roller & Threaded Hex Hub 5.44 H x 3.82 W x 0.69 D in gray in Silver | Wayfair

Has the roller on your screen door damaged or missing? This roller is a replacement for some Croft and Keller doors. It is also found in other household situations from the closet to the bathroom. It is a ball bearing 3/4 inch high density polyethylene... more

2 Pack Sliding Pocket Door Hardware Top Hanger Rollers Wheels Assembly Fit Part 1125 & 1500 Hardware Kit

Features a 1 Inch Diameter ball bearing wheels for smooth and long lasting quiet operation.Used on 1-3/8 inch thick doors Max Door Weight up to 220lbs (100kg). Fits Part #1125 and Replaces #1500 Hardware Kit. Compatible with 100 134F 138F 2610F Series... more

Prime-Line International Sliding Glass Door Roller Assembly, 1-1/2 in. Nylon Ball (Single Pack) 5.4 H x 3.75 W x 1.15 D | Wayfair D 1789

This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line 1-1/8 in. Steel Ball Bearing Sliding Glass Door Roller Assembly (Single Pack) 5.4 H x 3.75 W x 1.45 D in brown in Zinc Plated | Wayfair

This is a K-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more

Prime-Line Sliding Screen Door Spring-Loaded Roller, High Density Polyethylene Ball Bearing Roller 5.44 H x 3.82 W x 0.88 D, | Wayfair B 605

This spring-loaded style sliding screen door roller is used doors made by Pacesetter. The steel housing has a steel inner housing with a 1 in. high density polyethylene ball bearing roller. The housing has a mounting tab with a hole for the... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Roller Assembly, for Fleetwood Doors (Single Pack) 5.4 H x 3.75 W x 1.15 D in gray in Silver | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more

Prime-Line 1 in. Polyethylene Ball Bearing Roller, Sliding Screen Door Rocker Style Spring 5.4 H x 3.75 W x 1.15 D in gray in Silver | Wayfair

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Roller Assembly, for Nu-Air Doors (Single Pack) 5.4 H x 3.75 W x 0.9 D in yellow in Gold | Wayfair

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more

Wardrobe Sliding Door Roller Wheels Pulley Sliding Door Silence Fittings

Details: Material: Iron Max Load: 80KG Thickness: 2.5cm Dimension: 5.6*3.5cm / 2.2*1.4 inch Suitable for: light sliding door; wardrobe sliding door; glass sliding door washroom sliding door. Package Contents: 1 * Upper Roller 1 * Lower Roller 1 *... more

Prime-Line 1 in. Diameter Sliding Screen Door Center Grooved Roller 5.4 H x 3.75 W x 0.65 D in gray in Silver | 5.4" H X 3.75" W X 0.65" D | Wayfair

Has the roller on your screen door damaged or missing? This 1 inch diameter nylon constructed wheel features a center grooved design. It has a 1/4 inch diameter hole that fits most any axle. This universal design is used by many door manufacturers.... more

Prime-Line Diecast, Sliding Screen Door Latch Lever w/ No-Stop Pin (Single Pack) 5.4 H x 3.75 W x 0.3 D in gray, in Silver | Wayfair A 130

Has your sliding screen handle broken, is it worn out, cracked, damaged or just worn out? This lever is used on a variety of patio door manufacturer's sliding screen doors. It is a diecast metal lever with a nickel finish that features a 2-1/2 inch... more

Prime-Line 1-5/16 in. Nylon Sliding Glass Door Roller Assembly, for Likit (Single Pack) 5.35 H x 3.75 W x 1.05 D in brown in Cream | Wayfair D 1565

This is an all nylon roller assembly used on Likit patio doors. The housing is nylon with a bronze bushing axle for the 1-5/16 inch nylon roller. They are NON-ADJUSTABLE. They slide into an extruded channel inside the patio door's bottom rail. Used by... more

Prime-Line Sliding Screen Door High Density Polyethylene Roller, Bolt, Nut & High Density Polyethylene Bushing 5.44 H x 3.81 W x 0.63 D in gray | Wayfair

Has the roller on your screen door damaged or missing? This steel ball bearing roller features a 1 inch center grooved wheel. Also features a 1/4 inch diameter axle hole. Used by many door manufacturers. Order your roller replacement now to repair your... more

Prime-Line 7/8 in. to 1-3/8 in. x 7 ft. Vinyl Sliding Screen Door Weatherstrip (Single Pack) 7.1 H x 5.35 W x 2.1 D in Black | Wayfair B 660

Has the seal on you sliding screen door ripped or deteriorated in the sun? This sliding screen door bug seal is 84 inch long with tear strips adjustable widths from 7/8 inch to 1-3/8 inch (best results if you use a straight edge and sharp knife to cut... more

Prime-Line 1-1/2 in. Steel, Sliding Door Tandem Roller Assembly, for Rolleze Glass Doors (Single Pack) 5.4 H x 3.75 W x 0.85 D in White | Wayfair

This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... more

Prime-Line Sliding Screen Door Latch Strike, fits Columbia & Trimview Sliding Screen Doors 5.44 H x 3.82 W x 0.63 D in gray in Silver | Wayfair

Has you screen door latch been damaged, broken or is it just missing? This sliding screen door keeper or strike is often used by Columbia and Trimview screen doors as well as a variety of other screen door manufacturers. It is 1/2 inch wide with a 9/16... more

Prime-Line Plastic Sliding Screen Door Pull 4.2 H x 3.05 W x 0.65 D in Black | 4.2" H X 3.05" W X 0.65" D | Wayfair MP111

Has you screen door latch been damaged, broken or is it just missing? This plastic sliding screen door keeper or strike is used by a variety of screen door manufacturers. It is 5/16 inch wide with a 1/2 inch deep projection. It has an downward hook and... more

Prime-Line 7/8 in. Nylon, Flat Closet Door Roller, for Sliding Doors 2.5 H x 1.75 W x 0.6 D in yellow in Gold | 2.5" H X 1.75" W X 0.6" D | Wayfair

This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more

G.A.S. Hardware Sliding Door Legacy Handle Replacement Set Patio Doors Handle Set Offset Latch w/ Key 8.2 H x 1.75 W x 2.0 D in White | Wayfair

Features:COMPATIBILITY: Designed to fit sliding glass doors with fits 3 ¹⁵/₁₆ inches Hole Spacing, and 1-1/4" to 2-1/4" Door Thickness (Fabrication: 3 or 4 hole patterns)MEASUREMENTS: Escutcheon Plate Height: 8-1/2 Inch, Escutcheon Plate Width: 1 Inch,... more

G.A.S. Hardware Sliding Door Legacy Handle Replacement Set Patio Doors Handle Set Offset Latch w/ Key 8.2 H x 1.75 W x 2.0 D in White | Wayfair

Features:COMPATIBILITY: Designed to fit sliding glass doors with fits 3 ¹⁵/₁₆ inches Hole Spacing, and 1-1/4" to 2-1/4" Door Thickness (Fabrication: 3 or 4 hole patterns)MEASUREMENTS: Escutcheon Plate Height: 8-1/2 Inch, Escutcheon Plate Width: 1 Inch,... more

Prime-Line 2 in. Sliding Closet Door Pull (2 Pack) 2.13 H x 2.13 W x 0.32 D, Steel | 2.13" H x 2.13" W x 0.32" D | Wayfair N 7137

These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... more

Prime-Line 2 in. Sliding Closet Door Pull (2 Pack) 2.0 H x 2.0 W x 0.32 D, Steel | 2" H x 2" W x 0.32" D | Wayfair N 7136

These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... more

Prime-Line 2 in. Sliding Closet Door Pull (2 Pack) 2.13 H x 2.13 W x 0.32 D, Steel | 2.13" H x 2.13" W x 0.32" D | Wayfair N 7137

These mortise pulls are constructed of stamped steel and come in a bright brass-plated finish. The pulls feature a depth of 5/16 inch. Pulls like these are ideal for use on by-passing wardrobe doors and they are easy to install. Used on doors from 3/4... more