Home Hardware › Prime Line Products › Sliding › gliderite 3 5 inch ball

1 PK Prime-Line 1-1/4 In. Nylon Sliding Door Roller Set (2 Count)

Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into... more

Prime-Line Steel Sliding Door Roller Assembly w/ 1-1/2 Inch Steel Ball Bearing, Yellow, Set of 1 in Brown | 5.44 H x 3.82 W x 0.88 D in | Wayfair

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20... more

Prime-Line 1-1/2 in. Steel, Sliding Door Roller Assembly w/ Nylon Ball Bearing (Single Pack) in Gray/White | 5.3 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 5.35 H x 3.75 W x 0.45 D in | Wayfair D 1513

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... more

1PACK Prime-Line 1-1/4 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

1 PK Prime-Line 1-1/2 In. Sliding Door Roller Set (2 Count)

Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more

1 PK Prime-Line Sliding Door Steel Roller Assembly

This patio door roller is constructed from steel. Back patio door roller assembly with a 1-1/2 inch concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 inches wide 1-1/4 inches tall and 2-3/8 inches long. It is rear... more

Prime Line B639 11960B Sliding Door Tension Roller Each

Key Features Heat-treated high-tension steel spring 2 rollers used by metal industries. Center grooved 1/4 inch wide steel ball bearing roller. 1-3/4 inch long high-tension heat-treated steel spring. Includes no.8 x 3/8 inch phillips sheet metal screw.... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.3 H x 3.8 W x 0.95 D in | Wayfair D 1751

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare, and 1-5/8 in. height. It is rear adjusting with a threaded mounting hole on the... more

Prime-Line International Series, Sliding Window Roller Assembly, Flat Steel Ball in Gray | 5.4 H x 3.75 W x 0.3 D in | Wayfair G 3124

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers. | Prime-Line... more

Prime-Line Frameless Sliding Shower Door Top Bracket, 3/4 in, Flat Plastic Wheel, Steel Ball Bearings | 5.4 H x 3.75 W x 0.8 D in | Wayfair M 6054

This shower door roller assembly is constructed of extruded aluminum and comes in a milled aluminum finish. It features a thru-glass binder post and screw for fastening the bracket to the top of the glass on frameless sliding shower door systems. The... more

Prime-Line Sliding Screen Door Spring-Loaded Roller Assembly, High Density in Gray/White | 5.4 H x 3.75 W x 0.3 D in | Wayfair B 707

This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... more

Prime-Line 1-1/2 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) in Gray | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1589

This is a C-tab patio door roller assembly with a 1-1/2 inch concave nylon ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... more

Prime-Line Sliding Screen Door High Density Polyethylene Ball Bearing Roller & Threaded Hex Hub in Gray/White | 5.44 H x 3.82 W x 0.69 D in | Wayfair

Has the roller on your screen door damaged or missing? This roller is a replacement for some Croft and Keller doors. It is also found in other household situations from the closet to the bathroom. It is a ball bearing 3/4 inch high density polyethylene... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Brown | 5.4 H x 3.75 W x 0.45 D in | Wayfair D 1608

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Premiere (Single Pack) | 5.35 H x 3.8 W x 1.15 D in | Wayfair D 1752

This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The unique housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly, for Ador & Hilite (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.85 D in | Wayfair

This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... more

Prime-Line 1 in. Polyethylene Ball Bearing Roller, Sliding Screen Door Rocker Style Spring in Gray/White | 5.4 H x 3.75 W x 1.15 D in | Wayfair

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly, for Northrup (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.95 D in | Wayfair

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly, for Nu-Air Doors (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.9 D in | Wayfair

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more

Prime-Line 1-1/4 in. Sliding Door Ball Bearing Roller Assembly (Single Pack), Steel in Green/Yellow | 5.4 H x 3.75 W x 0.75 D in | Wayfair D 1518

This is a K-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Brown | 5.35 H x 3.75 W x 0.65 D in | Wayfair D 1588

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Brown | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1820

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.35 H x 3.75 W x 0.75 D in | Wayfair D 1686

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... more

Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Nylon Ball Bearing Roller in Yellow | 5.4 H x 3.8 W x 0.65 D in | Wayfair G 3014

This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows, with an adjustable steel housing and plastic ball-bearing center grooved roller. | Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Nylon Ball... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Lupton (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.9 D in | Wayfair

This is a F-tab patio door roller assembly with a 1-1/4 in. concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line 1-1/4 in, for Crossly Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Gray/Yellow | 7.35 H x 3.75 W x 0.5 D in | Wayfair

This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare... more

Prime-Line International Sliding Glass Door Roller Assembly, 1-1/2 in. Nylon Ball (Single Pack) | 5.4 H x 3.75 W x 1.15 D in | Wayfair D 1789

This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more

Prime-Line 1-1/4 in. Sliding Door Ball Bearing Roller Assembly (Single Pack), Steel in Brown | 5.44 H x 3.82 W x 0.69 D in | Wayfair D 1554

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly, for Premiere (Single Pack) | 5.4 H x 3.75 W x 0.65 D in | Wayfair D 1522

This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... more

Prime-Line 1-1/8 in. Steel Ball Bearing Sliding Glass Door Roller Assembly (Single Pack) in Brown | 5.4 H x 3.75 W x 1.45 D in | Wayfair D 1523

This is a K-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing... more

Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Steel Ball Bearing Roller in Yellow | 5.44 H x 3.81 W x 1.13 D in | Wayfair G 3133

This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows. It has an adjustable steel housing and steel ball-bearing center groove roller. | Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Steel Ball Bearing... more

Prime-Line Sliding Window Roller, 9/16 in. Stainless Steel, Ball Bearing Roller in Black | 5.35 H x 3.75 W x 0.65 D in | Wayfair G 3199

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier. | Prime-Line Sliding Window Roller, 9/16 in. Stainless Steel, Ball Bearing Roller in Black |... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Roller Assembly, for Fleetwood Doors (Single Pack) in Gray | 5.4 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack) in Yellow | 5.4 H x 3.75 W x 1.2 D in | Wayfair D 1688

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Roller Assembly (Single Pack) | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1815

This is a F-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more

Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Steel Ball Bearing (Single Pack) in White/Yellow | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1602

This patio door roller is constructed from steel and has a diameter of 1-1/4 in. It comes affixed to an adjustable aluminum housing assembly. This roller is used on Miller Industries and similar styled patio doors. | Prime-Line Sliding Door Roller... more

Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch Track, Aluminum in Black | 5.4 H x 3.75 W x 1.05 D in | Wayfair S 4033

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator. Finish: Black | Prime-Line Aluminum Tamper Resistant Sliding Window Lock, Fits 1/4 inch... more