Home Hardware › Machine Screws › 2 pcs stainless steel cabinet

2-56 x 1/2 Machine Screws / Phillips / Flat Undercut Head / 18-8 Stainless Steel / Black Oxide (Quantity: 8 000 pcs)

Flat Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded Steel Black Oxide over 18-8 Stainless Steel more

10-32 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: #10-32 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

8-32 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1200 pcs)

Thread Diameter-Pitch: #8-32 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

5/16-18 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Flat Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

10-32 x 2 1/2 Machine Screws / Slotted / Pan Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #10-32 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

1/2-13 x 2 3/4 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Round Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

10-24 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: #10-24 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

8-32 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #8-32 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

MS51957-45 / 8-32 x 1/2 Mil-Spec Machine Screws / Phillips / Pan / 18-8 Stainless Steel / DFAR Compliant (Quantity: 2 000 pcs)

Pan Phillips Machine Screw Coarse Thread Tested and Certified to Military Standards 300 Series Stainless Steel more

10-24 x 2 1/2 Machine Screws / Slotted / Indented Hex Washer / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: #10-24 Length: 2 1/2 Head Type: Indented Hex Washer. The head and washer are sometimes combined into a single unit. The built-in washer spreads out the clamping force of the fastener on the joint. In this case the top of the head... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface characteristic... more

2-56 x 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 5 000 pcs)

Flat 82 more

10-24 x 2 1/2 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 1 000 pcs)

Round Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/2-13 x 2 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Round Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

12-24 x 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 2 000 pcs)

Phillips Pan Head Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

2-56 x 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 5000 pcs)

Thread Diameter-Pitch: #2-56 Length: 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

8-32 x 1 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / Black Oxide (Quantity: 2 000 pcs)

Flat 82 more

5/16-18 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 5/16-18 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

6-32 x 2 Machine Screws / Phillips / Oval / 18-8 Stainless Steel (Quantity: 2 000 pcs)

Oval Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

10-32 x 2 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #10-32 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

12-24 x 1/2 Machine Screws / Phillips / Fillister Head / 18-8 Stainless Steel (Quantity: 2 000 pcs)

Fillister Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

10-32 x 2 1/2 Machine Screws / Slotted / Indented Hex Washer / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: #10-32 Length: 2 1/2 Head Type: Indented Hex Washer. The head and washer are sometimes combined into a single unit. The built-in washer spreads out the clamping force of the fastener on the joint. In this case the top of the head... more

AN960-C816L / 1/2 Mil-Spec Machine Screw Washers / 18-8 Stainless Steel / DFAR Compliant (Quantity: 2 000 pcs)

Flat Washers Light Series Tested and Certified to Military Standards Parts to DFAR compliant 18-8 Stainless Steel more

5/16-18 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 300 pcs)

Thread Diameter-Pitch: 5/16-18 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface... more

1/4-20 x 2 1/2 Machine Screws / Phillips / Fillister Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Fillister Head. The Fillister Head has a rounded top surface cylindrical sides and a flat bearing surface. The greater side height is what distinguishes it from a Pan Head. It is the preferred head... more

10-24 x 2 1/2 Machine Screws / Phillips / Truss Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #10-24 Length: 2 1/2 Head Type: Truss Head. Truss heads are wide with a low profile rounded top. more

2-56 x 1/2 Machine Screws / Six-Lobe (Torx) / Flat Head / 18-8 Stainless Steel (Quantity: 5 000 pcs)

Flat 82 more

10-32 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel / Black Oxide (Quantity: 1 000 pcs)

Pan Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded Steel Black Oxide over 18-8 Stainless Steel more

10-24 x 2 1/2 Machine Screws / Slotted / Flat Head / 18-8 Stainless Steel (Quantity: 1000 pcs)

Thread Diameter-Pitch: #10-24 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

5/16-18 x 2 1/2 Machine Screws / Phillips / Oval Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Thread Diameter-Pitch: 5/16-18 Length: 2 1/2 Head Type: Oval Head. Oval heads are countersunk (cone shaped under the head) with a rounded top. Also known as the raised counter sunk head this style has the signature conical bearing surface... more

12-24 x 1/2 Machine Screws / Slotted / Flat Undercut Head / 18-8 Stainless Steel (Quantity: 2 000 pcs)

Flat Undercut Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more

1/4-20 x 2 1/2 Machine Screws / Phillips / Pan Head / 316 Stainless Steel (Quantity: 500 pcs)

Thread Diameter-Pitch: 1/4-20 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

8-32 x 2 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 1 000 pcs)

Flat 82 more

12-24 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #12-24 Length: 2 1/2 Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used... more

10-24 x 2 1/2 Machine Screws / Phillips / Pan Head / 18-8 Stainless Steel / Black Oxide (Quantity: 1 000 pcs)

Pan Phillips Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded Steel Black Oxide over 18-8 Stainless Steel more

10-32 x 2 1/2 Machine Screws / Phillips / Truss Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #10-32 Length: 2 1/2 Head Type: Truss Head. Truss heads are wide with a low profile rounded top. more

12-24 x 2 1/2 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel (Quantity: 200 pcs)

Thread Diameter-Pitch: #12-24 Length: 2 1/2 Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top. more

1/2-13 x 1 1/2 Machine Screws / Slotted / Round Head / 18-8 Stainless Steel (Quantity: 100 pcs)

Round Slotted Machine Screw Manufactured to ASME B18.6.3 dimensions Fully Threaded 18-8 Stainless Steel more