Hand Tools › Irwin › fuze 16 1 4 high

D.1 13/16 HX1-14

Features and Benefits: Advanced die geometry: Allows for faster cutting with longer life Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life Etched: Die size is etched on each tool for easy... more

Hanson D.1 HXCD3/8-16

Features and Benefits: Advanced die geometry: Allows for faster cutting with longer life Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life Etched: Die size is etched on each tool for easy... more

Hanson 3/8 18NPT PIPE DIE 1-7/16 ACROSS

Features and Benefits: Advanced die geometry: Allows for faster cutting with longer life Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life Etched: Die size is etched on each tool for easy... more

Irwin Tools 9439 Hanson Hexagon Machine Screw Die 7/16 - 14 NC 1 Each

Ideal for routine maintenance repair work and for rethreading where high accuracy and tolerance thread is not critical. Recommended for use with hexagon die stock. Die can be used with a wrench or socket when space is limited. Designed for hand... more

Irwin 7004 Hanson Hexagon Taper Pipe Die 3/8 -18 NPT 1-7/16 Across

Irwin Hanson Hexagon Taper Pipe Dies is ideal for plumbing air applications and for rethreading where high accuracy and tolerance thread is not critical. Recommended for use with hexagon die stock. Die can be used with a wrench or socket when space is... more

Irwin Hanson Fractional Tap (Hcs) 2-15/16 Inches L Carbon Steel - 1 per EA - 1334

This item is available but there is extended lead times. Please contact us. Ideal for routine maintenance. 1 per EA repair work and for rethreading where high accuracy and tolerance thread is not critical. Straight flutes are ground to provide rapid... more

Irwin Hanson Hex Head Multi-Spline Screw Extractor - 522/532 Series 3/16 In Bulk - 1 per EA - 53203

This item is available but there is extended lead times. Please contact us. Designed to remove broken studs. 1 per EA bolts. socket screws and fittings for high torque applications. Aggressive left hand spiral design for extra gripping power. Bolt... more

2PK Irwin 6527 5/16-18 NC-HCS Hex Die 1 Flat

Hex Die High Carbon Steel 1 Across the Flat 5/16 - 18 NC Bulk Hexagon and Round Dies. Best suited for maintenance and repair work. Ideal for maintenance and repair work. Recommended for use with hexagon die stock. Die can be used with a wrench or... more

Irwin 5/8 x 18 National Fine Thread 1-7/16 Hexagon Fractional Die Carbon S

5/8 x 18; National Fine Thread; 1-7/16 Hexagon Fractional Die; Carbon Steel; Ideal For Routine Maintenance; Repair Work & For Rethreading Where High Accuracy & Tolerance Thread Is Not Critical; Recommended For Use With Hexagon Die Stock; Die Can Be... more

1PC Hanson Hanson 6848 Hexagon Die 1-7/16

1PC Hanson Hanson 6848 Hexagon Die 1-7/16 Ideal for maintenance and repair work; Recommended for use with hexagon die stock; Die can be used with a wrench or socket when space is limited; Material: High carbon steel; Size: 9/16 - 12 NC; 1-7/16 across... more

Irwin Vise-Grip Locking Wrench 4-In. 1 Pack

Made of high-grade heat-treated alloy steel for maximum toughness and durability; replaces up to 16 wrench sizes. Heavy duty jaws lock on to three sides of a hex fastener and will not slip or mar; turn screw to adjust pressure and fit work stays... more

Irwin 80232 Hanson 1/4-28 NF Tap Drill Bit Combo Pack

Key Features High-speed steel drill bits ensure fast precise drilling High carbon steel plug taps are ideal for general-purpose threading Tap & drill combo sets sizes=1/4-28 nc Produces a thread that is strong yet easy to tap. High speed steel drill... more

Hanson 1/4 -20 DIE HEX

Features and Benefits: Advanced die geometry Allows for faster cutting with longer life Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life Etched: Die size is etched on each tool for easy... more

Hanson TAP PLUG 1/4-28 NF

Features and Benefits: Material types: high carbon steel for hand tapping applications and high speed steel for machine tapping where critical dimensions are required Etched: tap size and recommended drill bit size are etched on each tool for easy... more

TAP PLUG 1/4-20 NC

Features and Benefits: Material types: high carbon steel for hand tapping applications and high speed steel for machine tapping where critical dimensions are required Etched: tap size and recommended drill bit size are etched on each tool for easy... more

Hanson 1/4-20 TAP #7DRL

Features and Benefits: High speed steel drill bits ensure fast precise drilling High carbon steel plug taps are ideal for general purpose threading Designed for hand threading work in a variety of materials Tap size and drill size are etched on each... more

1/4 -18 NPT DIE HEX

Features and Benefits: Advanced die geometry: Allows for faster cutting with longer life Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life Etched: Die size is etched on each tool for easy... more

Irwin 1837562 Impact Magnetic Nutsetter 1/4 x 6 Each

Highlights: Screw head size: 1/4 Overall length: 6 Socket body diameter: 7/16 Lobular nutsetters are built for maximum durability performance and long life with impact tools Designed to drive the fastener from the side rather than forcing the corners... more

IRWIN 9420 Machine Screw Dies 1/4-20 Thread NC Right Hand Thread HCS

HN9420 Features: -Advanced die geometry Allows for faster cutting with longer life. -Material types: High carbon steel for cutting of external threads by hand - High speed steel for longer life. -Etched: Die size is etched on each tool for easy... more

3PK Irwin 1320 Tap-1/4 -20 NC-HCS Tap-Bulk

Taper Tap High Carbon Steel 1/4 - 20 NC Bulk Plug Taper and Bottom Taps. Best suited for maintenance and repair work. Ideal for routine maintenance repair work and for rethreading where high accuracy and tolerance thread is not critical. Straight... more

Irwin Hanson Carbon Steel SAE Pipe Taper Tap NPT 3/4 in. - 14 NPT 1 pc.

Pipe taps high carbon steel cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped. more

1Pack Irwin IWAF24314 Nutsetter 1/4 Steel

Nutsetter Measurement System English/Imperial Fastening Size 1/4 in Tool Insertion Size 1/4 in Hex Overall Length 2 9/16 in Impact Rated No Magnetized Tip Yes Finish Tool Steel Material Steel Slide to Clean No Number of Nutsetters Included 1 Tool Brand... more

Irwin Tools 9503ZR Hanson Hexagon Taper Pipe Die 1/4 -18 NPT Each

Ideal for plumbing and air applications and for rethreading where high accuracy and tolerance thread is not critical. Recommended for use with hexagon die stock. Die can be used with a wrench or socket when space is limited. Designed for hand threading... more

1 PK Irwin Vise-Grip The Original 4 In. Long Nose Locking Pliers

Ideal for tightening clamping twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to... more

Irwin 1768772 Construction Chisel 1/4 Inch Tip 3-5/8 Inch Oal Hcs Blade Ergonomic Handle

Key Features Large strike cap withstands repetitive hammer strikes Ergonomic handle design with ProTouch Grip is durable enough to withstand jobsite abuse High-quality hardened steel blade for excellent performance and edge retention Bevel edge chisels... more

Hanson BOLT EXTRACTOR SET 5PC 3/4 -1 W1/2 DRIVE

Features and Benefits: Designed specifically to remove lugnuts Reverse spiral flutes are designed to bite down to provide maximum gripping power High carbon steel ensures longer life and greater durability Universal lobular design fits all types of... more

1 PC Irwin Tools 59400CD Quick-Grip Locking Handi-Clamp 4

Quick-Release Trigger Allows For Fast And Easy Positioning And Release. Variable Force Controlled With User S Grip The Tighter You Squeeze The More Clamping Pressure Is Applied. High-Tech Resin Construction Provides Strength And Durability. Specially... more

1 PK Irwin Vise-Grip The Original 4 In. Curved Jaw Locking Pliers

Ideal for tightening clamping twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to... more

2Pc Irwin Hanson Steel SAE Drill and Tap Set 13/64 in. 1/4 in. 2 pc

IRWIN® HANSON® has been manufacturing High Carbon Steel threading tools for over 100 years and has proven itself to be a brand you can trust. Performance thread quality durability and ease of use - proven for over a century. more

Irwin 9503ZR Hcs Hex Die 1/4 Inch - 18 Npt Each

Hexagon dies high carbon steel taper pipe die 1 inch across flat-carded size 1/4 inches -18npt Ideal for plumbing and air applications. Ideal for plumbing and air applications. Ideal for plumbing and air applications. more

Irwin 9503ZR Hcs Hex Die 1/4 Inch - 18 Npt

Hexagon dies high carbon steel taper pipe die 1 inch across flat-carded size 1/4 inches -18npt Ideal for plumbing and air applications. Ideal for plumbing and air applications. Ideal for plumbing and air applications. more

Irwin 8203 Hanson 1/4 18 National Pipe Taper Tap

Key Features Cuts internal threads in pipes Nominal size of the tap is that of the pipe fitting being tapped Tapered at a rate of 3/4 in per ft Taper pipe taps high carbon steel pipe size 1/4 inches -18 npt Cuts internal threads in pipes tapered at a... more

Irwin 102L3 Vise Grip Original Series Locking Plier 10 in Oal 1-3/4 in Jaw Opening Plain-Grip Handle 5/8 in W Jaw

Key Features;Straight jaws provide maximum contact on flat square or hex work;Turn screw to adjust pressure and fit work;Constructed of high-grade heat-treated alloy steel for maximum toughness and durability;Classic trigger release designed to provide... more

IRWIN Tools VISE-GRIP Pliers Flush Diagonal with Spring 4 1/2-Inch (2078925)

These IRWIN VISE-GRIP FD4 4-1/2-inch Flush Diagonal Pliers provide high leverage for exerting greater force at the jaw. Their nickel-chromium steel construction provides great strength and durability while the built-in ProTouch grips provide extra... more

IRWIN VISE-GRIP Pliers with Spring Flush Cut Diagonal 4-1/2-inch (2078925)

IRWIN VISE-GRIP Pliers with Spring Flush Cut Diagonal 4-1/2-inch (2078925) - IRWIN VISE-GRIP pliers provide high leverage for greater force at the jaw of the pliers - Nickel-chromium steel construction for overall strength and durability - ProTouch... more

1PK Irwin Vise-Grip 2078925 4-1/2 Flush Diagonalonal Plier

Diagonal Cutting Pliers Flush Cut 4-1/2 Long Spring Loaded with Wire Cutter Molded Grips Spring loaded pliers ideal for electrical work in tight spaces. Best suited for maintenance and repair work. High leverage for greater force at the jaw. Induction... more

Irwin Industrial Tool 1-4 in. 28 NF Steel Thread HCS Plug Tap

HCS plug tap.Specifications Precision ground straight flutes provide rapid chip removal for efficient threading. Tap produces a class 2B thread. High carbon steel. Size: 28 NFFeatures Ideal for all general-purpose threading. Used when threads must go... more

1PC Irwin Irwin 1877714 Oxide Metal Countersink Bit Set 1/4

1PC Irwin Irwin 1877714 Oxide Metal Countersink Bit Set 1/4 Highlights: Dia: 1/4 ; Precision ground 82 degree tip for countersinking most machinable metals wood or plastic; High speed steel with black oxide coating for corrosion resistance; 5 flute... more