Boats, Kayaks & Boating Equipment › PVC › stainless steel taco holder rack

8 Pcs Paddle Board Boat Accessories Canoe Accessories Rope Fixator Pvc Buckle for Boat Fixator Buckle Kayak Cords Rings Inflatable Boat Rope Buckle Rope Buckle Holder Stainless Steel Pvc

Description These are small D-shaped buckles which are firmly and durable have a good load capacity and are suitable as fasteners in daily life. Suitable for yacht kayaks etc. It is used to the rope in the kayak. D ring patch is easy to install and use... more

Pactrade Marine Side Mount Stainless Steel 304 Fishing Rod Holder with PVC Liner - Pressed Flange Mount for Marine Boat Yacht 10inch Tube

Material: High Quality Stainless Steel 304 side mount Marine rod holder with stainless side mount brackets comes with Black PVC Liner. Stainless Stopper pin built into the base of the rod holder to secure the right position for rod butt. With pin on... more

Pactrade Marine Stainless Steel 304 Fishing Rod Holder 9.5 W/ PVC Cap 30 Degrees Marine Boat

This is a high quality Stainless Steel 304 Fishing Rod Holder with Neoprene gasket & insert With PVC cap. It is at 30 degree angle; Dimensions: 9.5 L By 1 7/8 (241.3 mm BY 47.6mm) Item: P54075 more

Five Oceans Clamp on Fishing Rod Holder for Rails 7/8 to 1 inch AISI316 Stainless Steel (4 Pack) FO4499-M4

This Five Oceans Clamp on Fishing Rod Holder Stainless Steel for Rails 7/8 to 1 inch is Made of AISI316 Stainless Steel which is highly resistant to rust and corrosion even when exposed to saltwater. A protective UV-resistant PVC liner keeps your rod... more

Sea-Dog Cast Stainless Steel Flush Mount Rod Holder w/Cap - 30°

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is... more

2 Pcs Kayak Accessories Paddle Board Equipment Boat Ring Fittings Holder Elastic Rope White Pvc 304 Stainless Steel

Description These are small D-shaped buckles which are firmly and durable have a good load capacity and are suitable as fasteners in daily life. Suitable for yacht kayaks etc. It is used to the rope in the kayak. D ring patch is easy to install and use... more

Side Mount Stainless Steel 304 Fishing Rod Holder With PVC Liner - Pressed Mount For Marine Boat Yacht 10Inch Tube

Material:Stainless Steel 304 side mount rod holder with stainless side mount brackets comes with Black PVC Liner Stainless Stopper pin built into the base of the rod holder to secure the right position for rod butt. With pin on the bottom to allow any... more

Five Oceans Clamp on Fishing Rod Holder for Rails 7/8 to 1 inch AISI316 Stainless Steel (2 Pack) FO4499-M2

This Five Oceans Clamp on Fishing Rod Holder Stainless Steel for Rails 7/8 to 1 inch is Made of AISI316 Stainless Steel which is highly resistant to rust and corrosion even when exposed to saltwater. A protective UV-resistant PVC liner keeps your rod... more

Five Oceans Flush-Mount Fishing Rod Holder 15-Degree Top Flange w/ Flip-up Cap Open Base End Stainless Steel FO4496

This Five Oceans Flush Mount Rod Holder 15-Degree is made of AISI316 Stainless Steel and PVC UV Resistant Flip-up Cap to Resist the conditions of the Marine Environment. This Rod Holder has a 1 1/2 inches (50.8mm) inside diameter center opening for the... more

White Water 57739S Stainless Steel Rod Holder Black PVC Liner and Cap

These White Water stainless steel rod holders are made of stamped marine grade stainless steel 304. The flange of the rod holders are welded to a polished stainless steel 304 tube with rubber liners inside. These economy rod holders are available in 15... more

Five Oceans Flush-Mount Fishing Rod Holder 30-Degree Top Flange w/ Flip-up Cap Open Base End Stainless Steel (2 Pack) FO4497-M2

This Five Oceans Flush Mount Rod Holder 30-Degree is made of AISI316 Stainless Steel and PVC UV Resistant Flip-up Cap to Resist the conditions of the Marine Environment. This Rod Holder has a 1 1/2 inches (50.8mm) diameter center opening for the rod... more

Five Oceans Flush-Mount Fishing Rod Holder 90-Degree Top Flange w/ Flip-up Cap Open Base End Stainless Steel FO4498

This Five Oceans Flush Mount Rod Holder 90-Degree is made of AISI316 Stainless Steel and PVC UV Resistant Flip-up Cap to Resist the conditions of the Marine Environment. This Rod Holder has a 1 1/2 inches (50.8mm) diameter center opening for the rod... more

325175-1 Stainless Steel Flush-Mount Rod Holder with Cap

Features Formed 316 stainless Slim line with uv resistant PVC cap and full length pe liner Rod holder angle is 30 degSpecifications Material: Stainless Steel Dimension: 4.5 H x 5.25 W x 11.75 L Weight: 1.22 lbs - SKU: ZX9NRTHR3293 more

Marine City Stainless Steel Flush Mount Rod Holder & PVC Liner with Cap -15 Degree

International products have separate terms are sold from abroad and may differ from local products including fit age ratings and language of product labeling or instructions. more

Yacht Accessories Boat Rod Holder Wardrobe Socket Rv Awning Flange Stainless Steel 9

Description These pole sockets are made of reliable and excellent stainless steel material durable and practical enough. Excellent wear resistance firm practical and durable. Perfect for use to support curtain rod clothes rail closet rod ship yachts... more

White Water 57738S Stainless Steel Rod Holder Black PVC Liner

These White Water stainless steel rod holders are made of stamped marine grade stainless steel 304. The flange of the rod holders are welded to a polished stainless steel 304 tube with rubber liners inside. These economy rod holders are available in 15... more

Sea-Dog Line 325175-1 Stainless Steel Flush-Mount Rod Holder with Cap

Flush Mount Rod Holder with Cap can accommodate rods up to 1-1/2� in diameter. Features a 30° angle. Constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Installs with three #12 FH... more

Marine City Stainless Steel Flush Mount Rod Holder & PVC Liner with Cap -90 Degree

International products have separate terms are sold from abroad and may differ from local products including fit age ratings and language of product labeling or instructions. more

Pactrade Marine Boat Stainless Steel 316 Fishing Rod Holder 8.6 PVC Cap Flush 30 DEG

This is a high quality Stainless Steel Fishing Rod Holder. It is at 30 degree incline and comes with PVC cap; Dimensions: 8.6 L By 1.62 (219 mm BY 41.3mm) Item: P80276 more

Piripara Wall Mounted Kayak Rack Storage Folding Hanger Kayak Ladder Kayak Holder Indoor/ Outdoor Boat Canoe Carrier Black

SPECIFICATION: Condition: 100% Brand New Color: Gloss Black Material: Steel Total load capcity: 100 lbs (1 Pair) Size: Reference as picture Tube diameter: 19mm Net Weight(approx): 2.6 Lbs (1 Pair) FEATURE: Rubber pads protect the hull finish Steel... more

Piripara Wall Mounted Kayak Rack Storage Folding Hanger Kayak Ladder Kayak Holder Indoor/ Outdoor Boat Canoe Carrier Red

SPECIFICATION: Condition: 100% Brand New Color: Gloss Red Material: Steel Total load capcity: 100 lbs (1 Pair) Size: Reference as picture Tube diameter: 19mm Net Weight(approx): 2.6 Lbs (1 Pair) FEATURE: Rubber pads protect the hull finish Steel... more

MoreChioce 6PCS Stainless Steel D-ring Patch Heavy Duty SUP Bungee Deck Rigging Kit with 2.5m Elastic Rope for PVC Inflatable Boat Kayak Canoe Deck Accessories Gray

Features: D-ring set: these kayak D-ring can be used with the oar rope and you can grab oars walking sticks nets and other objects while sitting on the boat. These D-ring pad patches are suitable for most kayaks roof racks trailers ground sheets... more

COR Surf Tie Down Straps Silicon No-Scratch - Surfboard Kayak and Canoes SUP Surf Roof Rack (28 )

The oversized stainless steel cam has been designed so large or small fingers can access it easily and we wrapped it in a silicone sleeve to make sure your car s paint job doesn t get dinged or dented. Set of two rack pads Durable 600D oxford fabric... more

Pactrade Marine Boat Pontoon SS Flush Mount 15° Fishing Rod Holder 9.5 PVC Cap

This is a high quality polished Stainless Steel 304 Fishing Rod Holder. It includes rubber cap which is made of PVC. It is at 15 degree angle. Polished stainless steel top plate. stainless steel tubing. Standard 15 degree angle to vertical. Includes... more

Sea-Dog 325175-1 Flush-Mount Rod Holder with Cap

Product Description Formed 316 stainless. Slim line stainless steel construction with UV resistant PVC cap and full length PE liner. Rod Holder angle is 30°. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers... more

Sea-Dog 325175-1 Flush-Mount Rod Holder with Cap

Product Description Formed 316 stainless. Slim line stainless steel construction with UV resistant PVC cap and full length PE liner. Rod Holder angle is 30°. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers... more

Five Oceans Winch Handle Holder UV-Stabilized and Non-Corrosion White PVC Self-Draining System 11-1/2 Long - FO4687

Winch Handle Holder made of High-Quality UV stabilized Non-Corrosive White PVC. Great to resist the harsh condition of the marine environment. Mounts anywhere in a vertical position using screws. Mounting Hardware 4 Stainless Steel Screws and Nuts... more

Five Oceans Winch Handle Holder UV-Stabilized and Non-Corrosion White PVC Self-Draining System 11-1/2 Long - FO570

Winch Handle Holder made of High-Quality UV stabilized Non-Corrosive White PVC. Great to resist the harsh condition of the marine environment. Mounts anywhere in a vertical position using screws. Mounting Hardware 4 Stainless Steel Screws included.... more

CE Smith Pontoon Square Rail Adjustable ClampOn Rod Holder

The C.E. Smith Pontoon Square Rail Adjustable Clamp-On is a must-have for any boater looking to secure their fishing pole or rod tube while on the water. Made from a durable 304 stainless steel tube lined with a UV-resistant Black PVC and fitted with a... more

Attwood Adapter Plate for Inflatable Boats 5017-6

Specially designed to mount Attwood s fishing rod holders to inflatable boats and kayaks. Made from heavy duty injection molded PVC. Includes stainless steel mounting hardware for rod holder base. more

Seachoice 15391 Marine Speedometer Pitot Kit

Pitot Kit Includes: 20 PVC tubing(1) Black plastic clam shell vent(4) Black plastic tube holder(6) Stainless steel self-tapping screws more